Phone, Telegram, WhatsApp, Viber

ABRO ABRO A rear-view mirrors, 0.6 ml, RV-03-R

Brand: ABRO
Product Code: 10244886
$10.76
In Stock
This product has a minimum quantity of 6
Characteristics
A country
USA
Type of capacity
Tube
Type of glue
Special
Weight, g/volume, ml
0.3
...

Upensed fast -acting anaerobic glue. It is used to fix the rear-view mirror on the windshield.

Properties:

  • used to fix the compounds of metal-glass, metal metal, glass-glass;
  • < Li> The resulting connection is resistant to shock loads and vibrations;
  • withstands sharp temperature changes.

Application:

  • Mark the area of ​​fixation on the windshield from The outside.
  • Carefully clean the glued surfaces from pollution, the remains of the old glue.
  • For the best result, create light roughness on the surface of the glass and the mirror holder using fine -grained sandpaper. Degrease and clean.
  • Remove the cap from the glass ampoule of the activator (accelerator) and put it to the other end of the ampoule. Carefully crush the ampoule with your hands. Wait until the felt tip is filled with an activator.
  • apply a thin layer of activator to the area of ​​fixation on the windshield. Wait for 1-2 minutes.
  • Tear off the nose of the ampoule with glue (adhesive) and apply, without smearing, one drop to the mirror holder. Press the holder tightly to the glass and hold motionless for 1-2 minutes.
  • you can start installing a mirror after 10 minutes.
  • it is recommended to apply glue at a temperature inside a cabin not lower than +15 ° ° 15 WITH.

    Characteristics
    A country USA
    Type of capacity Tube
    Type of glue Special
    Weight, g/volume, ml 0.3
    Write a review
    Note: HTML is not translated!

    There are no reviews for this product.