AGAT SILVERLINE, 520ml

is intended:

• to remove the wide range of varnishes: acrylic, oil, alkyd, formaldehyde, vinyl, nitro -cellulose, etc.;
• for cleaning from mounting foam ( liquid and hardened) construction and other tools;
• for softening and removal of old installation foam from any structures (products).
• for softening (removal) of epoxy resins.

Attention! It is used on products made of metal, wood, concrete, ceramics, etc. Materials (plastic - depending on the structurally forming polymer - before use, check the resistance of the material).

Application:

The tool is most effective In the temperature range from 0 ° C to +20 ° C. Efficiency drops sharply under the influence of direct sunlight, on warmed surfaces. Before use, the product is thoroughly mixed with intense shaking! Apply on a cleaned surface without bubbleting (without rubbing and smoothing) a spatula, brush, brush with a layer with a thickness of at least 1.5-2.0 mm. After 7-45 minutes (exposure time depends on the conditions of use, thickness and nature of the coating), remove the old paint with a metal brush, a spatula, a scraper or other auxiliary tool (device). Rinse the surface with water. If necessary, repeat the procedure for applying the washing. Before staining, degrease the working surface. To increase the efficiency of washing action, it is recommended to cover the surface with the washing of a plastic film applied to it. Before starting work, experience washing in a small area. Average consumption: from 0.5 kg to 1.0 kg of washing per 1 m².