Anti-corrosion polymer-biomatic mastic, aerosol, 1 liter

Anti-corrosion polymer-biomatic mastic is designed to process the outer and inner surface of the bottom of the car and arches of the wheels. It forms a wear -resistant protective coating that prevents the effects of salts and alkalis. Improves noise and thermal insulation of the vehicle, has moisture- and dirt-repellent properties.

The protective layer, characterized by increased frost resistance, does not crack and does not exfoliate at a temperature of up to -600 ° C.

The tool can be used as the protection of metal structures and communications located outdoors and underground, as well as to protect wooden surfaces located under the influence of high humidity.

Features:

• are applied directly to metal, paintwork and wooden surfaces;
• does not require the use of additional drying products;
• creates a protective moisture -repellent layer;
• does not harm the paint and metal surfaces;
• compatible with all paints and varnishes;
• You can process undigested surfaces;
• When mastic gets on the paintwork, it is washed off by a beethumen spots with a cleaner.

Instructions for use

at a temperature not lower than +10 ° C. Protect surfaces that are not subjected to processing. Before use, shake the balloon vigorously for 1-2 minutes after the knock of the ball appears. Apply the product from a distance of 25-30 cm to dry, previously cleaned from loose rust and, if possible, a low -fat surface of 2-3 layers, with an intermediate drying for 10-15 minutes. The coating is ready for operation after 2 hours. The full time of drying is 24 hours.

safety measures

• work in a well -ventilated room, be sure to use personal protective equipment (protective hermetic glasses, gloves and overalls).
• When the bitumen mastic gets into unprotected parts of the body, rinse it with a solvent, and then rinse the area with water and soap.
• Keep in a tightly closed container in places inaccessible to children away from sources of fire and heat.
• Do not allow direct sunlight, heating over +500 ° C.