Auto -conservation of the thresholds "Moville" with a converter of rust, aerosol, 1000 ml

Features:

• is applied both to metal and paint and varnish surfaces, and on other coatings that do not have a synthetic basis;
• does not require the use of additional means for drying;
• creates a protective moisture -repellent layer;
• does not inflict a negative effect on the paint and metal surfaces;
• compatible with all paints and varnishes.

• on the processed surface inside the body is applied with a special spraying nose of a worn on the tube, which penetrates into the hole and sprays the "movil" around itself;
• when processing the surface, only spraying is used The head, and the pipe and spray spout is removed;
• the consumption of the working composition of the one layer - 400 g/m2;
• The time of complete drying at t +200s - 1.5 - 2 hours ;
• Before applying the coating, the surface must be cleaned of dirt, loose rust and it is desirable to degrease;
• the composition is applied to the surface at a temperature of +100C to +300C. After the first layer dries, the next is applied. After drying, the surface becomes brown in color;
• in case of re -using the cylinder, it must be turned and pressed on the spray head until the Moville solution stops from the cylinder and gas begins to go. If the spraying head is still clogged, then it can be cleaned with a solvent;
• remove the composition from the surface without causing harm to it, you can use the "cleanser of the bitumen spots" from the section "Cleaners".
< /UL> The necessary safety measures:
• work in a well -ventilated room, it is imperative to use personal protective equipment for organs of vision (protective hermetic glasses), leather (chemical -resistant gloves) and workwear;
• when hit unprotected areas of the body, can be washed off with a solvent (for example, white spite);
• stored in a closed container, in places not accessible to children. Transportation and storage: direct sunlight is not allowed, heating from heat sources over +500C.