Butyl tape tape isospan SL
SL is operating for gluing the isospan of steam-hydraulic insulation with the aim of sealing the overlaps of the material.
When gluing vertical and horizontal joints of the film materials in the roofs and walls, the connecting tape isoospan SL is glued to the edge of the lower reinforced panel with anti -adhesive paper upward (the tape is rolled out with a light pressing into the material at a given distance from the edge of the panel). Then, with the overflow required according to the instructions, the upper panel of the material is laid and rolled out. Anti -adhesive paper is removed from the tape and both panels are pressed against each other. Installation is recommended at room temperature and humidity on a dry and clean surface.
Technical characteristics:
Composition: Butil-kauchuk. Moisture absorption: 0 - 0.2 %. The temperature mode of application: from -40 ° C to + 80 ° C. The installation temperature: not lower than + 5 ° C. Dimensions (SHHT): 15 x 1 mm. Length: 45 m| Characteristics | |
| A country | Russia |
| Length, m | 45 |
| Material | Polypropylene |
| View | Vapor barrier |
| Width, see | 1.5 |
There are no reviews for this product.