Carburetor Cleaner Auto Master, 300 ml, aerosol

Carburetor Cleaner 300ml Aerosol - designed to remove resins, soil and other worked out substances from the external and internal parts of the carburetor (throttle shifts, nozzles, etc.).

Aerosol packaging allows you to penetrate inaccessible Places, quickly and effectively clean the carburetor without disassembling it.

Method of application:

• shake the balloon.
• Remove the air filter on the cold engine, after What to spray the composition to polluted external parts and into the cavity of the carburetor chambers.
• to allow to absorb and spray again, while working with a throttle damper.
• wait for the full evaporation of the composition.
• Start the engine.
• Clean the carburetor with repeated spraying of the composition in the carburetor cavity and at the same time slightly gasping, preventing the engine from stall.
• >
• At the end, install an air filter and let the engine work in idle mode for about 5 minutes.

Avoid entering painted plastic and hot metal surfaces. It does not damage rubber gaskets in the carburetor. Use at a temperature of at least +10 ° C.

Precautions:

• Fire is hazardous! To protect against direct sunlight and heating above 40 ° C!
• Do not spray near open fire and red -hot objects!
• Do not disassemble the cylinder and not give children! > Do not pierce or burn the cylinder, even after it is completely used!
• apply in the open air or in a well -ventilated room!
• Do not smoke during use!
• When it gets into the eyes and on the skin - rinse with water.
• when it gets into your mouth - rinse with water.
• when it gets inside - urgently take enveloping agents (egg protein, mucous decoctions, etc..) And consult a doctor.
• Store at a temperature of -40 to +40 ° C.

Volume: 300 ml.