Cold welding Kerry, universal, 60 g, KR-110

It is a two -component polymer composition of increased viscosity for fast, durable and sealed gluing products from metal, glass, ceramics, wood and most plastics. It is resistant to water, antifreeze and gasoline. The lightness in use allows the use of universal Kerry KR-110 metal-plastilin for reliable repair:- car nodes (water pump, crankcase pallets, tanks and radiator, minor body defects);- fasteners (restoration of broken threads and holes for hairpins, bolts, etc.);- fragments of parts (sealing of chips, shells, cracks, etc.);- plumbing, furniture and toys;- plastic pipes and boats.

application: - Clean the coated elements from dirt and rust with abrasive material. - degrease the surface with acetone or any other composition that removes traces of the oil.- Separate the part of the metal plasticine with a sharp object sufficient to repair the damage.- thoroughly knead until the uniform composition is obtained and apply to the place of repair.- tightly press the glued surfaces to each other. Wash your hands with warm water and soap.- During the curing of the composition (30-40 minutes), it is not recommended to expose the repaired product to shake and shock loads, this may affect the strength of the connection.- It is forbidden to use the composition for the repair of kitchen uglits that directly contacts food !

Important! If, as a result of storage of more than 24 months or sharp fluctuations in temperature, the outer layer of cold welding occurs - heat it to +60C. You can use heating radiators for this, hot water, etc. Let the composition cool a little and it will restore the initial properties.