Cold welding of fast acting for metal Eltrans, blister, 58 g

Two -component metal -filled polymer composition of high viscosity. Designed for fast and reliable gluing, repairing, sealing the compounds, as well as to restore lost fragments of products from heterogeneous metals: steel and its alloys, including Stainless, aluminum, brass. Excludes the occurrence of electrochemical corrosion on the border of metals. It is indispensable when the use of welding work is impossible or inappropriate. It is also used to restore lost fragments of products from the above materials operating at temperatures from -60 ºС to +150 ºС. The cured composition is characterized by high tightness and strength, withstands significant static and dynamic loads, as well as mechanical processing (grinding, drilling, thread cutting). Provides reliable repair on wet and oiled surfaces. It is resistant to water, antifreeze, oils and other technical fluids.

Method of use: all gluing work should be done at a temperature of at least +5 ºС. Clean the glued surfaces from dirt and rust, clean it with sandpaper, degrease and dry. Cut off the necessary part of the rod in volume and thoroughly mix both components with wet hands (use gloves) until the mass is uniform. The composition should be heated in the hands and should become plastic and sticky. The resulting mixture is immediately applied to the surface being repaired and, if possible, press and fix for 1 hour. To smooth the surface and give it the necessary shape, use flat objects moistened with water. Pack the unused part of the glue back into the film, place in a tube and close the lid tightly.