Decorative coating "Old Castle", 15 kg

purpose. It is used for all types of surfaces made of concrete, brickwork, drywall panels, cement plaster, other mineral surfaces.

properties. Almost without smell, non -toxic, fire -free, environmentally friendly material. Ready for use, is not diluted.

consumption. 1.5-4 kg/m2, depending on the texture of the picture (layer thickness).

drying time. From 24 to 72 hours, depending on the texture of the picture (layer thickness).

composition. Acrylic latex, pigment, filler, thickening, functional additives, fractional sand, water.

storage and transportation. In a closed original package at a temperature of +5 ° C to +30 ° C. Possible storage and transportation at a temperature of up to -20 ° C are no more than one month.

conditions of application. The air temperature and the processed surface is from +15 ° C to +30 ° C. Do not allow drafts.

tool care. Immediately after the end of work with varnish, rinse the tool with a large amount of water.

The expiration date. 2 years from the date of manufacture.

Precautions. If the material gets into the eyes, it is necessary to rinse them with a large amount of water. If it enters the skin - remove a cotton swab and rinse the contaminated area with a plentiful amount of water.

applying embossed plasters does not require a perfectly flat prepared surface and hides small wall defects. The surface before application is recommended to be treated with a “Optimist” with a deep penetration or penetrating, and then a primer covering 500 Optimist -elite. Before use, the material must be thoroughly mixed.

The old lock for facade use, as a rule, is tinted in the mass. It is applied with a cell uniform layer. Without allowing to dry the material, the surface is rolled with a fur roller to create a “fur coat”. Then, according to the raw, the material is applied with “islands” using the cell. Or you can apply a coating with a thickness of up to 3 mm. And create a general drawing with the whole plane of the cell.

, if necessary, to create a two -color texture and give additional decorative effects, the protruding parts of the finished embossed pattern can be painted with facade paint “Optimist” white or tinted. In this case, it is preliminarily recommended to grind the finished coating to remove the “scallops”, “naps”, and irregularities. Grinding is preferable to make a grinding grater (grain size 20-30). Drop the possible dust with a brush.