Decorative coating "Silk Road", 3 kg

The decorative opening of the Silk Road allows you to get the surface imitating walls upholstered by velvet. It is used for decorative decoration of walls of drywall plates.

The conditions of application: Air temperature and the treated surface from +5 ° C to +35 ° C, humidity - 65 ± 5%. The base should be well dried, not to have obscurely holding and shabby areas, perfectly leveled with the help of finish pasta, and then treated with a soil, approximately embedded in the color of the future coating.

Color preparation: The material can be applied in a tinted form. To obtain a given color, it is necessary to tint the substrate with soil into the color close to the desired color. Calamage is carried out with dyes or pigmented pastes. It is possible both industrial tinting and at home using an electric mixer. It is recommended to tint all the necessary volume of the material at once.

the application system: Mix the material thoroughly before applying. Application is made using stainless steel cell. 1st layer: apply the material to the selected area with the help of a cell in an even thin layer, without creating a pattern. 2nd layer: after drying (1-2 hours), apply the material with the help of the cell with quick chaotic strokes, I form a pattern. Without waiting for the material to dry, go re -spatula on the surface (as if combing it in different directions) in order to obtain the desired velvety effect. When forming a picture, it is recommended to carry out work in areas with an area of ​​0.7-1 m2. In order to avoid the appearance of visible joints, it is not recommended to leave the rectilinear boundaries between the sections, but to leave the boundaries of applying the material with directed, broken lines.

Consumption: 0.3 kg/m2 (the consumption depends on the desired effect, thickness of the layer and application of the application ).

Drying time: 24-72 hours, depending on the thickness of the layer and atmospheric conditions.

tool care: immediately after the end of work with the material, rinse the tool with a large amount of water. < /p>

storage and transportation: store 24 months from the date of manufacture in a closed original package at a temperature of +5 ° C to +30 ° C, protecting from the effects of moisture, heat and direct sunlight. Do not freeze!

precautions. It is necessary to carry out work in the open air or in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.

Composition. Latex acrylic, functional additives, thickening, marble filler, pigment, water.