Decorative coating "Wave", 14 kg

properties. Environmentally friendly, ready to use vapor -permeable material without smell.

appearance. White thick pasta.

• Material 0.8-2 kg/m2 (depending on the application method). Li>
• paint for wallpaper 50-100 g/m2.

Composition. Acrylic latex, thickening, functional additives, water.

storage and transportation. In a closed original package at a temperature of +5 ° C to +30 ° C. Possible storage and transportation at a temperature of up to -20 ° C are no more than one month.

conditions of application. The air temperature and the processed surface from +5 ° C to +35 ° C.

Tool. Kelma made of stainless steel, a helper-assistant, a fur roller, a foam sponge.

the drying time. From 24 to 48 hours (depending on the thickness of the applied layer).

surface preparation. It does not require a perfectly flat prepared surface, hides small wall defects. It is recommended to treat the surface before application with an “optimist” with a deep penetration or penetrating, and then a primer covering 100 optimist -elite.

tinting. The material in the mass does not be tinted. For the finish, it is necessary to hair the lesing mother-of-pearl composition of Optimist -elite in the desired color.

application. The base layer of the coating is applied with a cell with an uniform layer of up to 2 mm. Then, without waiting for the surface to dry out, the pattern is formed by the whole plane of the cell. The tinted shellting mother -of -pearl composition is applied to the finished surface with a fur roller. In order to avoid the formation of joints, it is necessary to apply the finish coating to the entire processed surface immediately, from corner to corner. Then, not allowing the composition to dry, the surface is rubbed with a foam sponge, creating the effect of "antiquity" and greater transparency. To manifest the pattern on a dried surface with a velor roller, a paint for wallpaper “Optimist” is applied.