Eltrans liquid covers, aerosol, 1000 ml./12 pcs.

Effective protective composition based on synthetic rubber is designed to prevent corrosion and abrasive wear of the wheel arches of the car, most exposed to sand, small stones and gravel. It forms an elastic coating resistant to aggressive effects of acid precipitation and road reagents. It does not relax and does not lose its elasticity at sharp temperature differences and in severe frost, has good adhesion. The effect of microvuming the composition gives the coating additional noise and thermal insulation properties. It does not contain bitumen.

Method of application: use at a temperature not lower than +10 ° C. Protect surfaces that are not subjected to processing. Before use, shake the cylinder vigorously for 1-2 minutes after the appearance of the ball. Apply the product from a distance of 25-30 cm to dry, previously cleaned from loose rust and, if possible, a degreased surface in 2-3 layers, with an intermediate drying 10-15 minutes. The coating is ready for operation after 2 hours. Full time of drying - 24 hours. Attention! In order to avoid clogging of the dispersal head, it is recommended to turn the balloon upside down at the end of the work and spray until pure gas is supplied.

Attention! In order to avoid clogging of the spray head, it is recommended to turn the balloon upside down at the end of the work and spray until the clean gas is supplied.