Eltrans thread fixer "Catious" blister, 10 g

Anaerobic sealant-fixer is designed for sealing and fixing threaded joints (including pipe), which will be quite rarely versed, or when operating on them, a significant detachable force (vibration, multidirectional shock loads, etc.) acts. Prevents self -disclosure by increasing the moment of fear. The use of a threading sealant makes the use of FUM tapes or a stopping compound using grover washers unnecessary. It polymerizes in gaps up to 0.4 mm between surfaces without air access, providing a reliable and sealed connection of homogeneous and heterogeneous materials. Optimal for use with the dimension of the connection thread from M5 to M20. The temperature range of operation is from –60 ºС to +160 ºС. The moment of unscrewing on a non -tight spiral pair after 24 hours is at least 10 N · m. Prevents corrosion. It is resistant to water, gases, machine oil, antifreeze, any type of fuel, prevents their leakage.

Method of use: clean the thread from rust, mud, oil, degrease with solvent and dry. Squeeze the composition from the bottle to the thread and evenly distribute the threads throughout the profile, checking the nut and down the thread with the thread with the sealant. Excess sealant remove with a pure rag. Make a final tightening of the threaded connection. The polymerization of the sealant occurs within 10-30 minutes (depending on the connection material and ambient temperature). 80% of the strength is gained after 4 hours at a temperature of at least 18 ºС. The full time of polymerization of the composition is 24 hours. To disassemble the compounds recorded by the sealant with a thread diameter of more M20, or if it is impossible to apply significant efforts for unscrewing, the connection should be heated to 150-200 ºС by an industrial hairdryer or a soldering lamp and disassemble.