Enamel Kudo thermal-resistant gold, 520 ml KU-5007

High -quality silicon thermal -resistant enamel Kudo is designed for painting metal products subject to heating to a temperature of 800C, such as the components of the exhaust system of cars, elements of pipelines and steam pipelines, parts of water heaters, boiler rooms and other equipment. It is replaced for external and internal work. Aerosol paint is easily applied to hard-to-reach places, has good covering and atmospheric resistance.

application:- In order to avoid aerosol, it is recommended to protect the surfaces that are not subject to color.- To achieve the best results, enamel is applied at an ambient temperature not lower than + 10C.- It is forbidden to color hot surfaces or details! Be sure to cool them to the ambient temperature in order to avoid ignition.-Before use, shake vigorously for 2-3 minutes.-The enamel is applied from a distance of 25-30 cm to pre-cleared from rust and dirt, a degreased, dry surface in 2-3 layers With intermediate drying 10-15 minutes at a temperature of +20C. Drying time "For Pink" at a temperature of +20C for at least 10 minutes. Out! To ensure the required properties, it is necessary after a day or more after painting to carry out the coating the coating the coating: heated steps to a temperature of 250C with a delay of 5-10 minutes at a temperature of 100C and 200C and maintain this temperature for at least 30 minutes. You can heat the product in both thermoshkofu and an open flame of a gas burner or a soldering lamp. When a temperature of 250C reaches the coating, the coating will begin to smoke slightly, which is the norm and indicates that the process of thermal cutter is coming. Entrance! It is forbidden to apply enamel on hot surfaces - the coating when applying can ignite! Attention! At the end of the work, in order to avoid clogging of the spray head, turn the balloon upside down and spray until the enamel stops.