Epoxy glue ABRO EC-300-R, transparent, syringe, 6 ml

Two -component transparent epoxy glue in the syringe. It is preceded for use in everyday life and for the car. Gluing metal, fiberglass, glass, rubber, wood, concrete, porcelain, ceramics, vinyl and most plastics. Switch:- instantly grasps in 5 minutes;- light in use due to convenient and uniform dosing;- after drying it remains transparent;- does not give shrinkage, does not expand during curing;- the glued product can be polished, drilled, painted;- waterproof, resistant to detergents and most solvents;- fills the voids and cracks, restores the shape and volume of the product;- compact packaging for several applications: 1 ) Clean and degrease glued surfaces. For the best result, give the surface roughness. 2) Remove the plastic blade between the pistons. Holding the syringe with the spouts up, slightly pull the piston back so that the air bubbles begin to rise up. 3) break off the tip, use it in the future as a cap. 4) release excess air. Squeeze the same amount of hardener and resin on a clean surface. Squeeze the piston back, wipe the ends and close the syringe 5) thoroughly mix the spatula with a homogeneous mass. 6) apply the composition on the glued surfaces and slightly press.

grasping occurs 5 minutes after application. A glued item can be used after 15 minutes. The complete strength of the connection is achieved after 1 hour. With low temperatures, the solidification time increases. It is not recommended to use at temperatures above 93C.