Falling Polymer Polymer for the interior decoration Dano Jet 9, 20 kg (48 pcs/PAL)

Use the Danogips Dano Jet 9 polymer putty for finishing walls and ceilings in dry rooms. Elasticity, lightness of application, environmental friendliness - the main features of the product. The putty allows you to treat surfaces with a difference up to 4 mm.

Pay attention: the lifetime of the bolt mixture is at least 72 hours.

characteristics

• color: white.
• The putty is designed for cement, cement-lime, lime and gypsum plasters; for concrete and reinforced concrete; drywall and gypsum -containing bases.
• type of binder: copolymer of vinyl acetate.
• The consumption of the mixture per 1 m² with a layer thickness of 0.5 mm: about 0.6 kg.
• The consumption of the mixture per 1 m² with a layer thickness of 1 mm: about 1.2 kg.
• The consumption of the mixture per 1 m² with a layer thickness of 2 mm: about 2.4 kg.
• The temperature of the work: not lower than +13 ° C.
• Solution: at least 72 hours.
• The thickness of the applied layer: up to 6 mm.
• The amount of water for closing: 0.38 liters per 1 kg of dry mix; 7.5 l per bag 20 kg.
• Maximum filler fraction: up to 250 μm.
• Medium filler fraction: 60 μm.
• The drying time of the layer with a thickness of 0.5 mm: 1-2 hours.
• The layer drying time with a thickness of 1 mm: 3-6 hours.
• The layer drying time with a thickness of 2 mm: about 24 hours.
• packing: paper bag without perforation, with a plastic liner, Air Strea technology, 25 kg.