Famous putty, 0.35 kg

Paragraph putty for windows is made on the basis of natural natural oils. This product is used to seal suture joints, cracks and cracks in window structures at the junction of glass and frame. In addition, putty can be used to eliminate defects in the bases from cement, plaster and concrete. Suitable for the subsequent coating of an oil -based paint and vanicular materials.

the frame label for windows is a substance with a pasty consistency, which is optimal for sealing the gaps between the frame and glass. The putty is used for the sealing of chips, cracks, irregularities in the bases.

The main advantages of this product include simplicity in application, a low price, and the lack of need for special skills for work with the material. The main scope of the frame of the framework of the lamb is civilian and housing construction, which practices the installation of wooden window structures.

at the end of the application of a putty made on the basis of chalk and olifa, it needs to be covered with a paintwork with protective properties. The absence of a protective coating leads to the rapid destruction of the material as a result of the effects of temperature changes. As a result, this ends with a loss of thermal insulation properties. A gluing -based putty is characterized by higher resistance to aggressive factors of external influence, however, it requires a more thorough approach to work. This material hardens quite quickly, therefore, its application and distribution is carried out in a short time.

frame putty is indispensable when performing work to eliminate the cracks and confront the folds in the bindings. The material for such operations should have certain properties, such as moisture resistance and thermal insulation. When choosing a putty, it is necessary to focus on the conditions of its operation, because the climate in the room depends on the quality of this inexpensive sealant.

work on the application of putty does not require special skills, and non -professionals can easily cope with them. To ensure a tight fit of glass to the frame, it is necessary to apply a layer of material with a thickness of two to three millimeters. In addition, this application will avoid the penetration of moisture between glass and fold. When performing work in the cold season, in rooms with a temperature below 15 degrees Celsius, the composition is periodically warmed up in a container with hot water. The applied putty is aligned using a special tool - chisels or construction spatula. So that the composition does not stick to the tool, the latter is recommended to be periodically lowered into clean water.