Glue - Astrohim cold welding for plastic Total Bond, 55 g, AS - 9321

Designed for the quick and reliable repair of plastic bumper, batteries, air ducts and other parts from most plastics (except polyethylene, polypropylene and fluoroplast), including gluing plastics with heterogeneous materials. The temperature range of the use of renovated parts from -60C to +150 ° C.Plisher: Clean the glued surfaces from dirt and rust, clean it with sandpaper, degrease and dry. Cut the necessary part of the rod in volume and thoroughly mix both components with your fingers (can be wet) until the mass is uniform. Apply the resulting mixture to the repaired surface and, if possible, press and fix for 15 minutes. When used on wet or oiled surfaces, the mixture must be brushed to the reciprocating movements until it feels to stick to the surface (while the connection strength decreases by 20-25%). If it is necessary to repair at low temperatures, it is recommended to roll the ball from a thoroughly mixed composition and hold it in his hands until it heats up to 40-50C (but not more than 4 minutes from the beginning of stirring), then apply to the repair area. To smooth the surface and give it the necessary shape, use flat objects moistened with water.

Attention! The viability time of the mixture is 5-7 minutes. at 20s. Provided, ensuring the removal of the released heat (thin layer, low temperature, etc.), the viability time increases, when heated, it decreases. The composition "grabs" in 15 minutes at 20C. At this time, mutual fixation of the parts connected is required. After 1-1.5 hours, the connection can be subjected to machining and load.