Glue for rear-view mirrors Kerry, 0.5 g, set 2 pcs KR-152

high -quality two -component anaerobic glue is designed for strong and long -term fixation of the rear -view mirror on the windshield, as well as for gluing metals (including heterogeneous ones), glass and ceramics. The resulting adhesive compound has high resistance to vibration and shock loads. The temperature range of the adhesive compound is from -60C to +150C.

application: all gluing work is recommended at a temperature inside the cabin not lower than +15C. The glued surfaces should be dry, thoroughly low -powered, peeled from old glue. For applying different adhesive components, use different brushes! Apply a component of the same color (red or blue) to the bracket plate, and the other, in a ratio of 1: 1 (accurate dosage Not obligatory). Press the plate tightly to the glass at the gluing place and hold in this position until the glue is set about 3 minutes. (at ambient temperatures +24C). The adhesive compound reaches maximum strength after 24 hours, after which it is recommended to install a bracket with a mirror on the plate.