Hi-Gear Touchless Car Wash, non-contact, 1 l 25431h
Auto-shampoo for the contactless Hi-Gear Touchless Car Wash 1l, quickly and efficiently removes pollution from the outer surfaces of the car by contactless washing using polystylens or high-pressure apparatuses. It forms a plentiful active foam, which is easily washed off with water, without leaving traces and divorces. It does not lose its effectiveness when using hard water. Safe for paints and varnishes, plastic and rubber.
use: Pre -rinse the dirt with a stream of water under pressure. Apply foam to the surface of the car body evenly, wait 2-3 minutes. Wash the foam and pollution with a stream of water under high pressure thoroughly. When using a foam generator, dilute the shampoo with water in a ratio of 1: 20... 1: 50; When using the foam kit, dilute the shampoo with water in a ratio of 1: 2... 1: 5. The optimal dosage is selected individually and depends on the degree of pollution of the car, the equipment used, the temperature and hardness of the water.
it is not recommended to be used for cars that are damaged by the paints and varnishes to the metal. Do not allow foam drying on the paintwork of the car. Do not apply to the surface that has a temperature above +35 ° C.
Attention: Use in good ventilation conditions. Do not allow the composition to the skin and in the eyes. If you get into the eyes and skin, rinse abundantly with warm and clean running water. Dangerous when it enters. When swallowing, consult a doctor immediately. Store at a temperature of +5... +30 ° C.
Characteristics | |
A country | Russia |
Temper. restriction not lower ℃ | -15 |
Volume, l | 1 |
Volume, ml | 1000 |
Weight, g/volume, ml | 1000 |
There are no reviews for this product.