Mastic Anti-Corrosive Polymer-Bitumer Eltrans, Aerosol, 650 ml

The coating formed after processing with polymer-bitumen mastic has increased properties of protection from the effects of stones, sand, moisture, road reagents and other aggressive chemicals. Application of polymer-bitout mastic significantly reduces the noise level in the cabin, increases the anti-corrosion resistance of the body. The composition has increased adhesion and retains elasticity in a wide range of temperatures, does not flow out in the heat and does not crack in the cold. It is allowed to apply mastic on top of old anti -corrosion coatings. The guaranteed period of effective protection against corrosion is at least 5 years.

Effective anti -corrosion agent for various purposes:

• for anti -corrosion treatment of external, including varnishes, metal surfaces of the car ( The bottom, thresholds, arches of the wheels, etc.);
• for processing the internal surfaces of the car (floor of the salon, wings, hood, trunk, etc.);
• for waterproofing and anti-corrosion processing of metal and wooden structures contacting the humid environment (gas and water supply pipes, poles, supports, etc.).

Method of application: use at a temperature of at least +10 0s. Protect surfaces that are not subjected to processing. Before use, shake the cylinder vigorously for 1-2 minutes after the appearance of the ball. Apply the product from a distance of 25-30 cm to dry, previously cleaned from loose rust and, if possible, a degreased surface in 2-3 layers, with an intermediate drying 10-15 minutes. The coating is ready for operation after 2 hours. Full time of drying - 24 hours.

Attention! In order to avoid clogging of the spray head, it is recommended to turn the balloon upside down at the end of the work and spray until the clean gas is supplied.