Perforated backing luminaire for heated floors, pink1.8 mm, step 500mm, 8.4m2

• Unit of measurement: m²
• Sizes: 1050 × 8000 mm
• Step/sheet width: 500 mm
• The amount of m² in packaging: 8.4 m²
• Material: extruded polystyrene foam
• Purpose: for laminate and parquet board
• compatible with water heating floor < /li>
• form of release: accordion
• thickness: 1.8 mm

fast styling, high thermal conductivity, resistance to loads.

the substrate has antibacterial and antifungal properties that protect against various types of mold and fungi, including Aspergillus Brasiliensis (ATCC 9642), Penicillium Funiculosum (ACS 11797) ATCC 6205), Trichoderma Virens (AtCC 9645) , and Aureobasidium pullulans (ACS 15233). These properties are confirmed by the research of Intertek Testing Services Taiwan Ltd.

the substrate is designed for all types of flooring, laid by a floating method, and compatible with a water floor system. The perforated structure of the substrate contributes to the uniform distribution of heat from the heating system, improving heating efficiency. The design in the form of an accordion simplifies the laying process and reduces the installation time, and also reduces the amount of necessary consumables, since the sheets are already fastened to each other. The substrate is resistant to loads and helps to align the base, extending the service life of the floor covering.

Before laying the substrate, make sure that the base of the floor is clean, dry and even. Start laying from the corner of the room, placing a harlot underwear along the wall across the direction, in which laying a laminate or parquet board is planned. Leave the compensation clearances along the walls of 5 mm wide and glue the joints of the sheets with a metallized tape "Solid Aqua Stop" for sealing the joints. Remember that the substrate is intended only for floating systems, so do not fasten or glue it to the floor or walls.