Plasticizer for the masonry solutions GoodHim InterPlast at R, Summer, 5 liters

A comprehensive air -entertaining additive created specifically for construction solutions, while maintaining the landing and mobility of the solution from 4 to 24 hours in the open air.

The additive is used in production:

• concrete blocks.
• plaster solutions.
• structures made of light concrete on porous aggregates.
• It is allowed to use the additives in heavy concrete of low classes in strength.

The main properties:

• increases the air content in the solution of 10 - 12%. Li>
• increases the mobility of the solution of the solution.
• ensures high coherence and resistance to the stratification of mortar mixtures.
• increases the strength of the clutch of the solution with the base. Smalling the solution.
• Increases the time of conservation of the production of the mortar mixture on some brands of cement up to 24 hours.
• does not contain chlorides and can be used in the manufacture of reinforced and pre -stressed reinforced concrete structures.

Method of application: the additive is produced in liquid form, is ready for use by the product and does not require further dissolution or preparation operations. The supplement can be introduced both along with all the water of the closing, and into the prepared mixture. When transporting the solution to the construction site by dump trucks, it is necessary to ensure enough mixing time after the additive is introduced. The optimal amount of additive should be determined, in each individual case, through preliminary tests in the conditions of production. Recommended dosages from 0.3 - 0.8% (from the mass of cement) according to the finished solution. Other dosages are considered, according to the requirements for construction sites.

storage and transportation: The minimum shelf life is 36 months during storage in accordance with the manufacturer's instructions in a closed original packaging. Storage warranty period - within 12 months from the date of manufacture at temperature mode from: +5. ° C to +30 ° C, when randomly freezing the solution, it is recommended to warm it up and mix thoroughly.

safety measures: special requirements The product is not provided for the use of the product. It is recommended to use protective gloves. When it hits the skin, rinse with water. Do not allow the hollow to enter the mucous membranes, when it gets, rinse with a plentiful amount of water.

Composition: plasticizer, air -conquering component, stabilizer, water.