Prinmer Bitumen Tsaritsyn paints 4 kg

The primer is designed for the processing of mineral bases (concrete plates, cement-sand screed, etc.) and old bitumen coatings with the aim of exhausting and increasing adhesion of subsequent waterproofing or roofing bitumen materials.

method of use

Before use, the bitumen primer should be thoroughly mixed so that there is no sediment at the bottom of the container. It is allowed to apply a primer in several layers. Each subsequent layer should be applied only after the previous one dries. Work with a primer is allowed at a temperature of at least –10 ° C. At the negative temperature of the primer, it is recommended to open the lid and warm the mass in a steam or water bath to +30... +50 ° C.

the method of application

should be applied with a brush, roller or spray. p>

the time of complete drying

to dry one layer at a temperature of (20+2) ° C requires no more than 24 hours.

consumption on a single -layer coating: 250–350 g /m².

sustainer: bitumen, solvents.