Professional CLASS AQUA FIX, 60 ml

Reliable sealant for threaded compounds made of plastic and metal. The Aqua Fix kit is designed for sealing and fixing threaded and flange compounds: taps, fittings, joints in hot, cold water supply and gas supply systems (except oxygen) operating at a pressure of up to 50 atmospheres and temperatures from -60 ° to + 150 ° C. Resistant to oils, gasoline, diesel fuel, solutions of chemicals. It can be used on threaded compounds of ferrous and non-ferrous metals, plastic with a diameter of up to 2 "", replaces fluoroplastic fum tone, flax, sealing threads and paste. The resulting connection, as necessary, can be disassembled.

The fixation time to manual strength is 4-5 minutes. At low ambient temperatures and in gaps of more than 0.4 mm, this time can increase. The connection is gaining full strength 1-2 hours after screwing.

application:

• Clean the thread of rust, mud, oil, degrease with acetone or gasoline and dry.
• apply a spray a small amount of activator to the thread surface. Wait until the activator dries completely. You can process the surfaces with an activator in advance, because it retains its properties within 30 days after application.
• squeeze the product from the bottle to the thread and evenly distribute the threads throughout the thread and the upholstery along the threaded section With a fixer.
• make a final tightening of the threaded connection.
• sealant sealant after 4-5 minutes, full strength is achieved after 1-2 hours. Low temperature and increased gap can increase the fixation time.
• If the connection is difficult to dismantle, it is necessary to heat the connection to 100-150 ° C by an industrial hairdryer or a soldering lamp and disassemble.