Puttling gypsum thick -layer finish for internal work (up to 8 mm), 18 kg

The Unis Slik putty was created on the basis of natural materials for thick -layer and finish alignment of the surfaces of the walls and ceilings to subsequent decorative decoration: sealing shallow potholes, cracks, GCL seams, GVL using the reinforcing tape and decorating shells with a layer of up to 8 mm.

"Unis glacier" is used inside heated rooms with normal humidity.

The characteristics of the material

The temperature of the work: from +5 to +30 ° C. Filler fractions, no more than: 0.2 mm. The amount of water per 1 kg of dry mixture: 0.45–0.55 liters. Layer thickness: 0.5–8 mm. Consumption with a layer thickness of 1 mm: about 1 kg/m². The increased solution of the solution: 100 min. The drying time of the layer is 1 mm, at least: 6-7 hours. Compression strength, at least: 20 kg/cm² (2 MPa). Adhesion strength: at least 4 kg/cm² (0.4 MPa).