Putty putty for planing Plastix, deep potholes and cracks, 5 kg

putty-put-machine for sealing deep potholes and cracks Prosept Plastix-water-dispersion acrylic putty to fill chips, cracks, potholes and other holes in OSB stamps, wood, concrete, brick and plaster. Designed to eliminate defects inside and outside the premises, including in places with high humidity or periodic contact with water. The putty has high adhesion to different building materials, strength, hardness, water and atmosphere resistance. Easy to be applied, distributed on the surface and is further polished. It can be used as a finish putty.

surface preparation: clean the surface of dust, dirt. Old non -keen coatings to remove.

application: putty is applied by a spatula into the crack until it is filled with the composition. It is recommended to fill cracks with a depth of 10 mm and up to 3 mm wide. When eliminating large defects, the putty in several approaches will be required, giving the first layer to completely dry. To achieve a flat surface, iron putty with a spatula or plastic grater 5-15 minutes after applying the layer. At the end of the work, rinse the tool with running water. Work is carried out at a temperature of at least +5C.

Composition: acrylic dispersion, titanium dioxide, ground marble, preservative, functional additives.