Rust converter into the ground with Eltrans zinc, aerosol, 650 ml

is used for radical struggle against corrosion of steel parts before applying paintwork. The active integrated effect of highly dispersed zinc powder and tannin provides the converting of rust and cathode-prototective protection of the treated surface. The neutralization of corrosion is achieved by deep penetration of the composition into microcracks and pores. The surface treated with a rust soil transformer has a high degree of adhesion to paint coatings and does not require additional priming.

Method of application: use at a temperature not lower than +10 0C. Protect surfaces that are not subjected to processing. Before use, shake the cylinder vigorously for 1-2 minutes. Apply the product from a distance of 25-30 cm to a dry, previously cleaned from loose rust and a low-fat surface in 2-3 layers, with an intermediate drying 10-15 minutes. The full time of drying and the readiness of the surface for applying paint and varnishes is 2-3 hours.

Attention! In order to avoid clogging of the spray head, it is recommended to turn the balloon upside down at the end of the work and spray until the clean gas is supplied.