SBR-100 Eltrans Temporary Fixing Glue Skotch, Rhound, 650 ml

The transparent glue of unilateral application with low gluing stiffness is designed for temporary fixation of light materials (fabric, foil, paper, roller plastics, etc.) to homogeneous materials, such as metal, wood, glass and hard plastics. It is indispensable for temporary consolidation of materials with the possibility of further removal or re -taxation. When applied to one surface in a period from several minutes to several hours, it is possible to perform repeated peeling/crossing. It has high transparency, has a low ability to seep (not absorbed into porous surfaces) and does not harden over time. It has an insignificant smell. The number of re -sealing cycles directly depends on the villusiness of the surface and dustiness of the room (on average from 15 to 30 cycles). When spraying, it forms a transparent white web. Saves adhesive properties at a temperature of not higher than 35 ° C. Shear strength - 0.5 MPa. The consumption of the composition is 1 cylinder per 5-7 square meters. M2. Attention! Do not use foam and polystyrene products for gluing!

Method of application: use at a temperature of at least 10 ° C. Before use, shake the cylinder vigorously for 2-3 minutes. Before use, check the glue in a small area to verify the suitability of the product. The surfaces subject to gluing should be dry and cleaned of dust, dirt and traces of technical fluids and oils. To achieve a prolonged relay effect, apply glue to one of the glued surfaces with a layer of at least 0.5 mm thick (can be in several layers) from a distance of 15-20 cm. Tightly press the surfaces to each other. Excess glue remove.