Sealant for sealing interpanel sutures, 15 kg

A sealant for sealing the PH203 TM interpanel joints "Professional" is designed to seal door jambs, to close cracks and fill the seams between logs and a timber. The use of the sealant of pH203 is relevant for the following types of work: for sealing built -in plastic and wooden elements, as well as for long -term sealing of wooden, panel housing construction with water vapor. An irreplaceable material for sealing window frames made of wood and polymer, masonry, plaster, as well as for processing materials with reduced strength, such as foam concrete and building materials on a gypsum basis. The sealant pH203 is resistant to UV radiation, atmospheric influences, to temperature and humidity drops. It has high vapor permeability. Superficial coloring is possible. The sealant can be applied to wet (but not wet) surfaces. Due to the high thixotropic, the sealant of the pH203 can be applied to horizontal, vertical, inclined surfaces with positive and negative tilt angles. After curing, the sealant forms an elastic rubber -like material.

conditions when applying. The processed surface should be dry and clean, recommended surface and air temperature from +5 ° C to +35 ° C, relative humidity - 65 ± 5%. It is unacceptable to apply sealant during rain and snow!

surface preparation. Clean the surfaces of dirt, dust, fat, untouched particles, residues of cement mortar, residues of previously applied sealing materials, etc. It is possible to apply sealant both on a dry and a wet surface. The presence of drip moisture on the surface is unacceptable.

application. Apply using a spatula or syringe. Void and leaks are unacceptable. The surfaces of the applied sealant give the necessary shape using special templates. To obtain a neat seam, we recommend protecting the front edges of the structures with sticky ribbons. After applying the sealant, the tape is removed.

consumption. The sealant consumption depends on the size of the filled volume.

drying time. After 2 hours, surface drying occurs, complete hardening for 3 weeks.

storage and transportation. Store 18 months in a closed original package at a temperature of +5 ° C to +30 ° C, protecting from moisture, heat and direct sunlight. If the packaging has an additional “frost -resistant” label, transportation is allowed at a temperature of up to -25 ° C. When freezing the product, thawing at room temperature naturally. After thawing, the product retains all its properties.

precautions. It is necessary to carry out work on the street or in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.