Sealant of gaskets Kerry, black, high-temperature, 42 g, KR-146-2

The Kerry KR-146-2 silicone car sealant is used to repair or form gaskets in the car nodes subject to high temperatures, such as the crankcase/gearbox, the gang of the engine crankcase, the thermostat case, and the water pump. It can be applied to regular gaskets to improve their operational properties (not recommended for use on the cylinder head). It does not contain solvents and acids, does not cause corrosion, safe for oxygen sensors. It can be used to seal electrical connections and sensors. It is characterized by excellent adhesion to the surfaces of metal, plastic, glass, rubber. Silicone auto -petrolarly is suitable for sealing and repairing car headlights, eliminates leaks through car glass seals. It is vulcanized at room temperature (RTV), forms a solid flexible gasket. It does not crack and does not give shrinkage. The bonus is in the kit allows you to accurately dose and accurately apply a sealant. It is not destroyed under the influence of water, oils, antifreeze and other automobile technical liquids (with the exception of gasoline and DT). A wide temperature range of operation is laughed: from -from -from -from -from -from -from 60C up to +345C. For 2 linear meters with a roller diameter of 4 mm.

application: applied the sealant on clean, dry and low -powered surfaces at a temperature of +5C to +40C (the sealant temperature should be +20.. 25c) a continuous uniform strip with a thickness of 2-3 mm on one of the surfaces. The time of the formation of a surface film is 10-25 minutes; The time of full volulcanization of the gasket with a thickness of up to 3 mm is 24 hours (at a temperature of +23C and relative moisture of 50%). After the sealant volulcanization, additional canal of the bolts is not required. Cleaned with fresh sealant the tools and surface with the removal of gaskets and sealants "KR -969; Remove the hardened sealant mechanically.