Sheet substrate for warm floors, green 3mm, 5m2

characteristics:

• color: green
• unit of measurement: m²
• List's size: 500 × 1000 mm < /li>
• the number of m² in packaging: 5 m²
• thickness: 3 mm
• material: extruded polystyrene foam
• purpose: for laminate and parquet board < /li>
• compatible with a water heating floor

High thermal conductivity that ensures the effective distribution of heat from the warm floor system.

the substrate has antibacterial and antifungal properties that protect against various types of mold and fungi, including Aspergillus Brasiliensis (ATCC 9642), Penicillium Funiculosum (ATTC 11797), Chaetomium Globosum (ATC 6205), Trichoderma Viirens (a TCT 9645), and Aureobasidium Pullulans (ATT 15233). These properties are confirmed by the research of Intertek Testing Services Taiwan Ltd.

This substrate is suitable for styling for any type of flooring, mounted by a floating method, including water warm floor. Special perforation contributes to the effective transfer of heat from the heating system, while maintaining the stability of the flooring. The substrate is resistant to temperature extremes that arise when using warm floors and helps save energy during their operation.

Before laying the substrate, make sure that the base of the floor is clean, dry and even. On cold mineral bases and floors of the first floor, it is recommended to use a substrate with a vapor barrier layer or pre -layer a hydraulic insulation film. Start laying from the corner of the room, placing the sheets of the substrate with the smooth side down and tightly connecting them over. It is advisable to lay the rows of sheets with a half -displacement for uniform distribution of the load. Leave the compensation clearances along the walls of 5 mm wide and glue the joints of the sheets with a metallized tape for sealing the joints. Remember that the substrate is intended only for floating systems, so do not fasten or glue it to the floor or walls.