Sheet substrate for warm floors, yellow thickness 2mm, 10m2

High thermal conductivity and resistance to loads.

the substrate has antibacterial and antifungal properties that protect against various types of mold and fungi, including aspergillus brasiliensis (ATCC 9642), penicillium Funiculosum (ACS 11797), Chaetomium Globosum (ATCC 6205), Trichoderma Virens (AtCC 9645), and Aureobasidium Pullans (ATSS 15233). These properties are confirmed by the research of Intertek Testing Services Taiwan Ltd.

is designed for all types of flooring, laid down by a swimming method, and is compatible with a waterproof system. The perforated structure of the substrate contributes to the uniform distribution of air from the heating system, improving the efficiency of heating. Numerous small holes evenly distribute the load and help level the base, extending the service life of the flooring. The sheets of the substrates easily fit on large surfaces.

Before laying the substrate, make sure that the base of the floor is clean, dry and even. On cold mineral bases and floors of the first floor, it is recommended to use a substrate with a vapor barrier layer or pre -layer a hydraulic insulation film. Start laying from the corner of the room, placing the sheets of the substrate with the smooth side down and tightly connecting them over. It is advisable to lay the rows of sheets with a half -displacement for uniform distribution of the load. Leave the compensation clearances along the walls of 5 mm wide and glue the joints of the sheets with a metallized tape for sealing the joints. Remember that the substrate is intended only for floating systems, so do not fasten or glue it to the floor or walls.