Steaming sealant for sealing the inner layer, 15 kg

The sealant is designed to carry out internal work on sealing surfaces, the design of joints, the installation of the internal circuit of window, balcony and stained glass structures, sealing the cracks and masking of shrinkage defects. The sealant of the pH202 has high adhesion to the surfaces made of concrete, aerated concrete, slag blocks, gypsum and gypsum plaster, cement and cement plaster, drywall, brick, wood, chipboard (except for floors). The material has high vapor permeability properties, and its increased plasticity creates convenience when working.

conditions when applying. The processed surface should be dry and clean, recommended surface and air temperature from +5 ° C to +35 ° C, relative humidity - 65 ± 5%. It is unacceptable to apply sealant during rain and snow! Dilution of water can lead to a change in the properties of the sealant (decrease in adhesion, loss of thixotropic, etc.), it is possible to crack!

surface preparation. Clean the surfaces of dirt, dust, fat, untouched particles, residues of cement mortar, residues of previously applied sealing materials, etc. It is possible to apply sealant both on a dry and a wet surface. The presence of drip moisture on the surface is unacceptable.

application. The sealant is completely ready for use. Apply with a spatula, cells or other devices or tools. The sealant should be applied evenly without gaps with a strip of contact with a surface of at least 3 mm on each side. To give higher properties of adhesion, the surface is preliminarily treated with TM Professional.

consumption. The sealant consumption depends on the size of the filled volume.

drying time. After 2 hours, surface drying occurs, complete hardening for 3 weeks.

storage and transportation. Store 18 months in a closed original package at a temperature of +5 ° C to +30 ° C, protecting from moisture, heat and direct sunlight. If the packaging has an additional “frost -resistant” label, transportation is allowed at a temperature of up to -25 ° C. When freezing the product, thawing at room temperature naturally. After thawing, the product retains all its properties.

precautions. It is necessary to carry out work in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.

the drying time. Superficial drying -2 hours, complete drying occurs within 3 weeks.

Consumption depends on the size of the filled volume.

Composition: acrylic copolymer, filler, dioxide of titanium, technology. additives, water.