Stelaborate Harmosa with vapor barrier, 3mm, 10m2

• Unit of measurement: m²
• Size of the roll: 1000 × 10000 mm
• General characteristics: special metallized coating
• Step/sheet width: 500 mm
• number m² in package: 10 m²
• flooring: laminate/parquet board
• compatible with an infrared warm floor
• form of release: accordion
• thickness: 3 mm

Fast styling, vapor barrier, the presence of built -in adhesive tape, heat -reflecting effect (saving of electricity). < /p> Antibacterial properties:

the substrate has antibacterial and antifungal properties that protect from various types of mold and fungi, including Aspergillus Brasiliensis (ATCC 9642), Penicillium funiculosum (Attc 11797), Chatomium Globos UM (ATC 6205), Trichoderma Virens (ATCT 9645), and Aureobasidium Pullulans (Att 15233). These properties are confirmed by the research of Intertek Testing Services Taiwan Ltd.

the substrate is designed for all types of flooring, laid by a floating way. Metallized reflection of the upper layer reduces energy loss due to low heat transmissibility, making the substrate ideal for use with infrared warm floors. The peculiarity of the metallized coating material provides the best vapor barrier compared to the usual plastic film, reliably protecting the flooring from moisture. The design of the harmonica substrate simplifies the laying process and reduces the installation time, and also reduces the amount of necessary consumables, since the sheets are already fastened to each other and are equipped with built -in tape. Special marking on the fabric of the substrate with a step of 1 cm allows you to accurately measure and cut off the right amount of material. The substrate provides increased vapor barrier and prevents the output of moisture from the base.

Before starting work, make sure that the base of the floor is clean, dry and even. rooms, placing it with a metallized film up along the wall perpendicular to the direction of laying laminate or parquet board.

cut the luminar of the substrate around the perimeter of the room with the help of a stationery knife, leaving compensation gaps along the walls with a width of 5 mm.

Expand the next cloud canvas close to the previous one, without gaps, and carefully spread a special vertical valve over the neighboring canvas. Gradually peel off the protective tape from the tape and glue the sealing valve-verb along the entire length of the junction.

Continue laying in this way throughout the room. Please note that the substrate should be used exclusively for floating styling, so do not fix it and do not glue it to the floor or walls, and also avoid laying the substrate in several layers.