SUP Board inflatable Touring Kelpie 11 ", 335x80x15 cm

Touring Kelpie SAP Bord is designed for short walks and longer trips on calm water and small waves. Suitable for newcomers training and for amateur competitions.

Beginner users recommend using a board for short -term walks on calm reservoirs. More experienced users are suitable for long distances for a more active current. Successfully overcomes the oncoming current on the reservoir, but requires more skills for balance on the side waves.

course stability and high speed characteristics are provided by a keel, a slightly narrowed nose and a large length of the board.

Features

• The strong main coating of the board is connected to the high pressure chamber by lamination. This is a high -tech process that provides a perfectly even surface and the exact thickness of the board without differences.
• Drop Stitch technology - the camera consists of thousands of interweaving thin fibers. This gives stiffness along the entire length of the board. The increased density of the yarn provides high tensile strength. The camera withstands pressure up to 20 pounds per 1 square inch. Number of threads: 25000 per m²
• A new technology of connection chamber - CROSS STITCH FUSION. 30% tougher compared to conventional single-layer chambers of SAP beards. 25% easier compared to the established technology of manufacturing a double layer.
• The enhanced outer layer of Kant provides additional density and stiffness of the frame. With a lateral clash with a rigid object in water, for example, with a stone, the board will be left without damage.
• The air duct of the Kant is a laminated seam that provides additional tightness of the high -pressure chamber and the water resistance of the board.
• EVA mat with a diamond -shaped tread provides an ideal comfortable clutch with border. It is protecting from sliding legs along the board.
• A locking pressure valve with damage protection provides better tightness. The button system helps to easily lower the pressure in the board by pressing the button in the valve.
• Elastic lacing in the front part - to fix and transport baggage on the board.
• handle in the central part - for carrying pumped boards;
• sedentary keel. - for fastening the safety cable.
• 4 stainless steel rings - for attaching the seat.

properties

• Maximum load: 150 kg
• Board weight: 7.95 kg
• Optimal pressure: 12 psi
• Number of threads: 5000d x 500d x 500D, 25000 per m²
< /ul>

equipment:

• SAP-border;
• collapsible oar with height adjustment;
• two-chamber pump;
< Li> Bag-rug for storage and transportation;
• insurance (cable);
• EVA rug on the surface of the Borda;
• Instructions for the operation of the board and pump in Russian.