SUP Board Universal Kelpie, 10.4 "315x80x15 cm

The universal SAP border Kelpie is designed for walking on calm water and small waves. Suitable for training and rest athletes of any level of training. Due to universality, it is the most popular type of sap-dos. Thanks to thoughtful geometry, the border is comfortably controlled and gains speed well.

is suitable for engagement of the SAP Yoga. The width of the board is enough to balance on the water in a static position of the body.

stability in water is achieved thanks to the balance of length and width, as well as three fins in the rear: one large in the center and two small on the sides. P> Features of

• The strong main coating of the board is connected to the high pressure chamber by lamination. Therefore, the surface of the product is perfectly flat, and there are no differences in thickness.
• Drop Stitch technology is used in the manufacture of the SAP beard-the camera consists of many interweaving thin fibers. This gives the product stiffness along the entire length. The increased density of the yarn provides high tensile strength. The camera withstands pressure up to 20 pounds per 1 square inch. Number of threads: 25,000 per m².
• also used a new technology in the high -pressure chamber - Cross Stitch Fusion (cross -stitching). As a result, the chamber is 30 % tougher compared to conventional single-layer SAP units. And 25 % are easier than cameras with the established technology of manufacturing a double layer.
• The enhanced outer layer of Kant provides additional density and stiffness of the frame. With a lateral clash with a rigid object in water, for example with a stone, the board will remain without damage.
• The air duct of Kant is a laminated seam that provides additional tightness of the high -pressure chamber and the water resistance of the board.
• EVA embossed rug with a rhomboid tread provides an ideal comfortable clutch with border. It is protecting from sliding legs along the board.
• The locking pressure valve with damage protection provides tightness. The button system helps to easily lower the pressure in the board by clicking on the button in the valve.
• Elastic lacing in the front is designed to fix and transport baggage on the board.
• handles in the front, central and central and The back parts allow you to transfer the board in a pumped state.
• there is a removable spruce (fin).
• The kit includes a-rhusak bag-for carrying and storing the board and accessories.
<
• D-shaped stainless steel ring is designed to fasten the safety cable.
• 4 stainless steel rings are used to fasten the seat.

• Maximum load: 140 kg.
• SAP border weight: 12.6 kg.
• Optimal pressure: 12 psi.
• Number of threads: 25,000 per m².

• SAP Bord.
• saddle.
• Clear oar with height adjustment.
• pump. /li>
• bag-rug for storage and transportation.
• safety unlocked (cable).
• Remedcom. Russian.