Superplastifier C3 additive, 5 liters

Superplasticizer S-3 PC409 TM "Professional" is used in the production of monolithic and prefabricated reinforced concrete products and structures from heavy, light, cellular concrete in the construction of various purposes: civil, industrial, transport, road, etc. including in the manufacture of products and structures of drinking water supply systems. The S-3 PC409 superplasticizer is used in the production of responsible structures with an increased degree of reinforcement and complex configuration. The use of the Superplastifier S-3 PC409 additive allows you to increase the mobility of the concrete mixture from P1 to P4, increase the final strength characteristics to 50%, reduce cement consumption (by 20%), reduce water consumption when the binding substance is closed by 20-28%, increase concrete clutch from embedded reinforcement and metal products by 1.5-1.6 times with simultaneous inhibiting of the metal surface, get “cast” concrete with increased water resistance and fracture resistance, slow down the setting time and at the same time a further set of strength in concrete accelerate, reduce energy costs (with vibration, You) by 30-50%, and in some cases and completely abandon additional energy consumption.

application. Superplasticizer S-3 PC409 to enter into a concrete or dry construction mixture along with warm water. When calculating the water required on the college, the water should be taken into account in addition. Before laying a concrete mixture, remove snow and ice from previously laid concrete, formwork and reinforcement. The laying of concrete mixture is carried out continuously. In case of breaks, the surface must be hidden and heated. Laying a concrete mixture for snowfall is unacceptable. The concrete surfaces, unprotected by formwork, in order to avoid moisture or increased moisture due to atmospheric precipitation, should immediately be protected by a layer of waterproofing material. It is not recommended to use the additive in preliminary designs, in structures that are subjected to dynamic loads located in the area of ​​the alternating level of water and unprotected by waterproofing and in the railway structures located less than 100m from high-voltage current sources.

Consumption. 1.5-2.5 liters per 100 kg of cement.

storage and transportation. Store 18 months in a closed original package at a temperature of +5 ° C to +30 ° C, protecting from moisture, heat and direct sunlight. Up to 5 freezing/thawing cycles are allowed at a temperature of up to -25 ° C for no more than one month, but with mandatory protection against extracting water.

Precautions. It is necessary to carry out work in the open air or in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.

Composition: salts of monocarbon acids, water.