Superplastifier C3 additive, winter, 5 liters

Superplasticizer S-3 Winter PC410 TM "Professional" is used in conditions of low design temperatures of concrete hardening. The additive Superplasticizer S-3 Winter PC410 is used in the production of mobile mixtures for monolithic concrete, fiber concrete, spray concrete, cellular concrete, panting solution; In the manufacture of mobile mixtures in the production of cast, vibro, vibro -pressed reinforced concrete, reinforced concrete, paving, and decorative facade plates and paving stones. Increases concrete strength by 30-50% at the age of 1 day of normal hardening. Increases concrete strength at 28-day by grade 1-2. Increases the mobility of the mixtures (by 4-6 cm) without subsequent decrease in strength. Provides working condition and hardening of concrete mixtures at a temperature of up to -15 ° C. Reduces the cement content by 10-20%, electricity and water vapor. Reduces the flow rate of closing. The S-3 superplasticizer PC410 reduces or completely eliminates the formation of heights. Provides transportation of concrete mixtures in a re -concrete mixer up to 3 hours at negative temperatures while maintaining the declared mobility.

application. Introduce into concrete or dry construction mixture along with warm water. When calculating the water required on the college, the water should be taken into account in addition. Before laying a concrete mixture, remove snow and ice from previously laid concrete, formwork and reinforcement. The laying of concrete mixture is carried out continuously. In case of breaks, the surface must be hidden and heated. Laying a concrete mixture for snowfall is unacceptable. The surface of concrete, unprotected by formwork, in order to avoid loss of moisture or increased moisture due to atmospheric precipitation, should immediately be protected by a layer of waterproofing material. It is not recommended to use the supplement in preliminary designs, in structures that are subjected to dynamic loads located in the area of ​​alternating water level and unprotected by waterproofing and in the railway structures located less than 100 m from high voltage sources.

storage and transportation. Store 18 months in a closed original package at a temperature of +5 ° C to +30 ° C, protecting from moisture, heat and direct sunlight. Up to 5 freezing/thawing cycles are allowed at a temperature of up to -25 ° C for no more than one month, but with mandatory protection against extracting water.

Precautions. It is necessary to carry out work in the open air or in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.

Composition: salts of monocarbon acids, water.