Svarog Inverter "Arc 200" Pro "Z209S, 6.6 kW, 200A, electrode 1.5-5 mm
$554.26
In Stock
Characteristics
A country
China
AC/DC welding mode
No
Adjustable arc breeding
No
Adjusting the crater
No
Antistick (Antistick)
Yes
| Characteristics | |
| A country | China |
| AC/DC welding mode | No |
| Adjustable arc breeding | No |
| Adjusting the crater | No |
| Antistick (Antistick) | Yes |
| Burning welding wire | No |
| Change of polarity | No |
| Coil TIG stress in | 12 |
| Connection of the cooling unit | No |
| Coonscous run of wire | No |
| Current consumption, and | 43 |
| Degree of protection | IP21 |
| Display | No |
| Efficiency | 85 |
| Expise load, % | 60 |
| Hot Start (Hot Start) | Yes |
| Idle tension, in | 63 |
| Idle voltage MMA, in | 63 |
| Impulse welding mode | No |
| Isolation class | F |
| Labor voltage MMA, in | 20.4 - 28 |
| Lift-Tig (Lift-Tig) | Yes |
| Max. electrode diameter, mm | 5 |
| Maximum current, and | 200 |
| Maximum power, WT | 6600 |
| Memory of welding programs | No |
| Min. electrode diameter, mm | 1 |
| Minimum current, and | 10 |
| MMA power consumed | 9.4 |
| MMA welding mode | No |
| Operating mode 2t/4t | No |
| Power factor | 0.7 |
| PV at maximum current, % | 60 |
| Remote Control | No |
| SPOT welding mode | No |
| Tension, c | 220 |
| Test gas purge | No |
| The diameter of the electrode is mma, mm | 1.5 - 5 |
| The diameter of the electrode TIG, mm | 1 - 3 |
| The input voltage range | 220 |
| TIG welding current (Mon 100%), and | 160 |
| TIG welding mode | No |
| TIG, KAR power consumption | 6 |
| View | Welding inverter |
| VRD | No |
| Warranty period, months. | 24 |
| Welding current MMA (Mon 100%), and | 160 |
| Welding current MMA, and | 10 - 200 |
| Welding powder wire | No |
| Welding with cellulose electrode | No |
| Working voltage TIG, in | 10.4 - 18 |
Write a review
There are no reviews for this product.