Universal adapter to the screwdriver ash.2023d limit, d shaft 20/23 mm, T-YH-2023D

The universal adapter ASh.2023D for a screwdriver with a restrictive disc is suitable for the Ledoburs Tornado-M2, Buran (Buran), Iceberg (Iceberg), as well as Motoshtorm (Motostorm) and Electroshtorm (Electroshtorm). When using the UA-400.20 extension cord (*option), the adapter can be attached to the screws of the ice block tonar, Helios, Helios Long. With the help of this adapter, screwdriver and screw, you can easily drill holes, spending a minimum of effort and time on this. The limiting disk is designed to prevent the screw to fall into the hole in the event of it when it is weakened by the tightening of the cartridge. The improved two -stage design of the adapter output shaft has diameters of 20 and 22.8 mm (the changed dimensions allowed to minimize the gaps in the shaft connection/sleeve in the screw, the adapter and extension cords). The adapter shank has an enhanced trihedral working surface (the diameter of the shank 12 mm) and a restrictive croching for protection from falling when the cartridge tightening is weakened. The adapter shank is fixed in the cartridge of the screwdriver. The planting diameter of the screwdriver cartridge is 1/2 inch (13 mm). It is permissible to operate the adapter with a screwdriver with a voltage of 18V and a maximum torque of not more than 120 nm.

Characteristics:

• length: 147 mm.
• Diameter of a restrictive disk: 185 mm (± 1 mm)
• the diameters of the output shaft of the adapter: 20/22.8 mm.
• The diameter of the adapter shank: 12.0 mm.
• The landing diameter of the screwdriver cartridge: 1/2 inch (maximum clip diameter - 13 mm).
• The diameter of the holes for fixing the rifle -bar: 6.5/8.5 mm.
• Product weight: 0.5 (± 0.05) kg.
• Material: steel. P> The adapter can be used:

• for the ice block tonar, Helios with an extension cord of the UA-400.20 adapter;
• for the icyoburov Tornado-M2, Buran with the extension cord UA-800.20/Ush-500.20.20 (or Directly to the screw);
• for the Motoshtorm jacket with an extension cush-250.20/ Ush-400.20/ Ushm-400.20 telescopic (or directly to the screw);
• for icheberg icevods with an extension cord of Ush- 250.23/Ush-400.23/Usha-400.23 telescopic (or directly to the screw).

To fix the adapter, it is necessary to use:

• 1. The Barashka screw with M6 threads (special) (hole 8.5 mm (upper)) to join the icy workers iceberg and electroshtorm checkers;
• 2. The Barashka screw with a thread M6 (a hole of 6.5 mm) to join the Thornado-M2, Buran and to the UA-400.20 extension cord for ice shoes for the ice block tonar and Helios;
• 3. The Barashka screw with a thread M8 (a hole of 8.5mm (lower)) for joining the Motoshtorm 130-180R motor boots and a hole of 8.5 mm (upper) for MotostHorm 200r.
• 4. Scarlet Barashka with M6 thread (special) (8.5 mm Lower hole) to join the screws Electroshtorm 110-180r.

equipment:

• 1. Adapter - 1 pc.
• 2. Brand Barashka M6 (special) - 1 pc.
• 3. Rimmer disk - 1 pc.
• 4. Gaika M14x1.5 - 1 pc.
• 5. Spring washer Ø 14 (grover) - 1 pc.
• 6. Puck Ø 14mm - 1 pc.
• 7. Key S22 - 1 pc.