Vacuumor KitFort KT-1517, 130 W, lane length 1.2 m, max. Package width 29 cm

KitFort KT-1517 vacuum will ensure long storage periods of your favorite products. Products packed under vacuum retain longer a delicious look, taste and beneficial properties, and deteriorate much longer than the usual storage conditions.

The KT-1517 model provides a special compartment for rolls and cutters. With their help, you can independently make vacuum bags. First, form the bottom of the package, sealing the open end of the sleeve of the film, and then with the help of the runner cut the required length.

“dry” - the vacuumor pumps air out of the bag and then seal it; “Pulse” - pumping is carried out while you hold the button pressed; “Soldering” - the device seals a package without vacuuming; “Cancel” - stops the process of performing any action.

on the control panel there are “dry” and “moist” modes for printing dry or humid products. Wet products can wet the edge of the package, so the sealing time of packages is increased.

in KT-1517, you can turn on the pumping mode from containers. Vacuuming comes with the help of a hose inserted into the vacuum fiting at one end, and the other into the container cover. You can additionally purchase a set of containers KT-1500-10.

to ensure reliability when pumping air, the vacuumor closes tightly. To open the device, press the side buttons of the device at the same time, which fix the position of the lid when pumping air.

in the configuration with a vacuumer, 5 bags for vacuuming 22x30 cm and hose for pumping into containers go. In vacuum packages, you can place documents, money, matches, medicines, etc. This will protect objects from damp and water.