Venetian plaster, 1.5 kg

properties. With virtually no smell, non -toxic, fire -free, environmentally friendly material.

appearance. White thick pasta.

• material 400 g/m2.
• wax 15 g/m2.

composition. Latex acrylic, functional additives, thickening, water.

storage and transportation. In a closed original package at a temperature of +5 ° C to +30 ° C. Possible storage and transportation at a temperature of up to -20 ° C are no more than one month.

conditions of application. The air temperature and the processed surface from +5 ° C to +35 ° C.

Tool. Kelma made of stainless steel, a spatula, a helper-assistant, a polishing machine.

the drying time. 24 hours.

surface preparation. The basis for applying the material should be perfectly smooth. The surface of the base should be well dried, not to have inseparably holding and shallowing areas, leveled using a finish putty. The prepared surface is treated with an “optimist” with a deep penetration or penetrating, and then a primer covering 100 Optimist -elite, tinted approximately in the color of the applied material.

tinting. For this method of application, the material is tinted in the mass.

application. Apply the material to the selected area with the help of a cell with an even thin layer, creating a small pattern. Let the material dry for 30-60 minutes (depending on the temperature of the room). Then, the whole plane of the cell, it is necessary to smoot in the coating pattern for aligning the surface. Next, 2 layers are applied similarly to the first. 3 layer is applied with a thin layer with a thin layer to create a thinner and transparent coating. After that, it is necessary to give the surface to dry for 10-30 minutes and smoothed with a spatula to manifest the pattern. If it is necessary to use the coating in wet rooms, it is necessary to treat the dried surface with wax. Wax is applied with a thin even layer. It is necessary to let the surfaces dry 10-30 minutes. Then it is necessary to start polishing wax using a polishing machine with a nozzle made of soft unwilling material. The approximate time of drying the finish coating is 1 hour (the wax should not stick to his hands, but at the same time it is impossible to let it dry out). Maximum speed-2000-3000 revolutions/min. Polishing is done until a uniform glossy surface is obtained.