Waterproofing Knauf Flehendicht on a latex basis, 5kg
Purpose of
- Superfinished alignment of the floor with a layer of 0-5 mm.
- Ideal for parquet, laminate, linoleum.
- for office, public, residential premises.
- for dry and wet rooms.
- for the "Warm Paul" system.
- for concrete, cement-sand bases.
- for internal work.
- manual application.
- Mirror-gloom and even floor.
- Superon - can be applied "to the cut."
- economical - 20 kg per 13 m² with a layer of 1 mm.
- withstands wear from furniture on wheels.
- perfectly levels in the maximum layer.
- color: gray.
- water resistance: waterproof.
- binding: special cements.
- filler: thin milk marble.
- Fraction: filler <0.3 mm.
- layer thickness: 0-5 mm.
- mixture consumption: with a layer of 1 mm - 1.5 kg per 1 m².
- compression strength:> 20 MPa.
- bending strength:> 5 MPa.
- Clutch with concrete:> 1 MPa.
- wear resistance to the loading of a steel wheel drive under the coating (EN13813): class RWFC 350 - recommended for offices.
- shrinkage: <0.8 mm/m.
- The amount of closing water: 0.26-0.28 l/kg.
- The amount of closing water per bag: 5.2-5.6 l/20 kg.
- Soluration of the solution (ring d = 68 mm, h = 35 mm): 235-270 mm.
- use time: 30 minutes.
- The next layer is not earlier than: 24 hours.
- The application temperature, permissible: +10... +25 ° C.
- The application temperature, optimal: +15... +20 ° C.
- You can walk in: 3-4 hours.
- laying of coatings through: 1-3 days.
- The combustibility group (GOST 30244-94): NG (non-combustible).
| Characteristics | |
| A country | Russia |
| View | Mastic |
| Weight, kg/volume, l | 5 |
Write a review
There are no reviews for this product.