Waterproofing of the floor of the technonic 1.5 mm (0.75*10m) Self
Waterproofing of the Tsopolnikol flat roof is a self -adhesive baseless material. Installation is carried out on the base primed by the bitumen primer.
Features
- The self -adhesive lower strip facilitates the installation
- The roll has a convenient size for use.
- Additional equipment is not required.
- It is possible to lay on combustible bases and waterproofing, without the use of a protective screed.
- The service life is more than 45 years.
Physico-mechanical characteristics
- mass 1 m²: 1.5 + 0.1 kg.
- conditional strength: at least 1 MPa.
- Water absorption within 24 hours: no more than 1 %.
- Flexibility at low temperatures on the beam with a radius of 15 mm remains up to –25 ° C.
- water resistance at a pressure of at least 0.06 MPa: absolute.
- The softening temperature of the knitting room: at least 85 ° C.
- Relative lengthening: at least 60 %.
- The strength of the clutch with concrete, with metal: at least 0.2 MPa.
- Type of protective coating of the top: Spunbond.
- type of protective coating of the bottom: anti -adhesive film.
| Characteristics | |
| A country | Russia |
| Length, m | 10 |
| View | Waterproofing |
| Width, see | 75 |
Write a review
There are no reviews for this product.