Waterproofing of the foundation of the techno-nicol 1.5 mm (1*10m) self-sorted

The waterproofing of the “Technonikol” foundation is a rolled, unlawful self-adhesive bitumen-polymer waterproofing material.

Scope

The material is intended for the device for waterproofing the foundations of buildings with a technical floor or unexplained room, in sandy soils with a low level of groundwater (below the level of the foundation plate).

The work

according to the instructions for the installation given on the packaging.

Storage

Store the materials in an upright position in a closed room or under a canopy, in a row in height, in conditions providing protection against moisture and sun exposure at –35 to + 35 ° C.

transportation

transport materials in covered vehicles in a row in height.

Information about the packaging

for packing rolls, a cardboard box is used. The pallet with the boxes is located in a thermal package.

Physico-mechanical characteristics

• mass 1 m²: 1.5 + 0.1 kg.
• conditional strength: at least 1 MPa.
• Water absorption within 24 hours: no more than 1 %.
• Flexibility at low temperatures on the beam with a radius of 15 mm remains up to –25 ° C.
• water resistance at a pressure of at least 0.06 MPa: absolute.
• The softening temperature of the knitting room: at least 85 ° C.
• Relative lengthening: at least 200 %.
• The strength of the clutch with concrete, with metal: at least 0.2 MPa %.
• Type of protective coating of the top: polymer film.
• type of protective coating of the bottom: anti -adhesive film.