A primer reinforced Ozon VD-Ak 013M deep penetration, acrylic 5 liters

Acrylic primer with antiseptic additives and double acrylate content is designed to prepare various surfaces before puttying and further coloring, water-dispersion varnish materials. After drying, it forms a transparent film and evens out the absorption ability of the base, strengthens porous and fragile surfaces. Suitable for external and internal work.

Scope. To prepare plastered, putty, gypsum, concrete, brick and other types of porous mineral surfaces, as well as surfaces of cardboard, chipboard and fiberboard.

Recommendations for use. Mix before use. Apply a roller, brush or spray. Operation at a temperature of +5 ° C and relative humidity is allowed not more than 80 %. Highly absorbing surfaces are recommended to be primed twice. Approaching subsequent layers - no earlier than 2 hours. The coloring of the primed coating is recommended no earlier than after 6 hours.

Transportation and storage. Store and transport in a hermetically sealed factory packaging at a temperature of +5 to +40 ° C. Do not expose a long effect of direct sunlight.

Technical characteristics

• density: about 1 g/cm3.
• Consumption: 100–150 g/m2 in one layer, depends on the state of the base and the application method.
• drying time: final coating stabilization within 24 hours.