A primer with an antiseptic "Super-Paul", 10 l

The super-cap with an antiseptic PG111 TM Professional is designed to priment and gypsum basis before the use of moisture for floors on a cement and gypsum basis in order to increase adhesion to the base, reduce water absorption, premature water outflow from the moisture and exhaust the base. It is also possible to process PG111 and ceilings with soil before using plaster, putty and adhesive mixtures.

Recommendations for applying a prima of a super-floor with an antiseptic PG111. Mix the primer carefully before application. Apply with a brush, roller, brush or spray, preventing passes and puddles. If the PG111 soil is absorbed into the base in 5-10 minutes and dried, repeated priming is necessary. Repeated priming is performed approximately 1 hour after applying the first layer. Before laying the spell, wait for complete drying.

Precautions. It is necessary to carry out work in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves and a spire. If the materials get into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.

Type of surface: concrete, brick.

composition: water, acrylic latex with ultramella particle size, functional additives, antiseptic.