ABRO MASTERS sealant transparent, on a narrow blister, 85 g 13-en-ch -re-re-s

A multi -purpose transparent silicone sealant of gaskets on a vinegar basis. It is preceded for the repair or replacement of almost all gaskets found in the car. It is used for the repair and sealing of valve covers, oil pumps, water pumps, lids of gearboxes, differentials, intake manifolds, etc. Switching:- intended for use at temperatures up to 260C;- allows you to form a gasket up to 6 mm;- retains high elasticity and strength after solidification;- is not subject to cracking and deformation during temperature cycles;- high adhesion to various materials;- is not destroyed under the influence of oils, water, antifreeze, transmission fluids;- successfully withstands compression, stretching and shift: 1. Remove the fragments of the old gasket and carefully clean the surface. 2. Remove the cap, pierce the protective foil and screw the attached nozzle. 3. Cut the tip of the nozzle so as to create a hole of the required size. 4. Apply a sealant of gaskets around the perimeter on the entire mating surface, forming a layer of 2-3 mm thick. Leave holes for fasteners. 5. Before assembly, let it dry for 10 minutes. The complete drying of the formed laying occurs in 24 hours. When the first opening of the sealant, the separation of a transparent polymer is permissible. Before applying to the surface, squeeze the contents until a homogeneous mass appears.