Acrillic deep penetration of "Renoton" universal 10l

• The primer has a high penetrating ability.
• strengthens the surface and provides adhesion for subsequent coatings.
• prevents the growth of bacteria, mold and fungus.
• It is fireproof and non -toxic.

Scope

• is suitable for internal and outdoor work.
• is used for diluting, strengthening and processing porous, strongly absorbent surfaces before applying dispersion and decorative coatings. It is used for facades, walls and ceilings inside dry and wet rooms - corridors, bedrooms, living rooms, hallways, bathrooms, elevators, offices and industrial premises.

suitable for the following types of surfaces

• Brick.
• concrete.
• gypsum -plane.
• plastered.
• wooden.
• and other porous surfaces.

The preparation of the surface

Remove the fragile layers of old paint and whitewashing. The base should be clean, durable and dry. Mix the primer and apply with a brush, a roller or a spray gun from the corner to the corner according to the principle of “wet along the wet” in 1-2 layers, depending on the absorption of the base. Carry out the procedure at a temperature of not lower than +5 ° C with an intermediate interlayer drying 24 hours.

Consumption and drying time

average consumption: 0.2–0.3 l/m² in 1 –2 layers, depending on the absorption of the base. Drying for casting: 1 hour. Complete drying: 24 hours at a temperature of +18 ° C.

safety measures

are not recommended to mix with other types of paintwork and solvents. If you get on the face and eyes, rinse these areas with warm water.